 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 PA-C-101 Chisel Teeth Set. Includes hardware. Used for Pro Groomer PR and All Star AS Groomers
|
|
|
|
 AL-G-008 Wheels (No Air - No Flat). Never need air. Complete with 2 Sealed Bearings (one each side) and Grease Fitting. 5/8" I.D. (axle) x 1.375 O.D.
|
|
|
|
 AL-G-009 Wheel Bearings. 2 needed per wheel. Flanged Bearing 5/8" I.D. (axle) x 1.375 O.D.
You may also find these locally at hardware stores. Literature with your original machine includes specs for these wheel bearings.
|
|
|
|
AL-H-074 Lock Nuts for Wheels.
These "thin" nylon insert lock nuts are a standard 5/8"-11 thread - BUT they are "thin" when compared to a
standard lock nut. We use these thin nylon insert lock nuts to secure wheels on axles of all of our machines.
|
|
|
|
 AL-G-017 Aluminum Channels. 6 ft. long. 11 holes. Used to hold poly brushes.
|
|
|
|
 AL-G-016 Black Poly Brushes. 6 ft. long. Price discount for qty. of 6 or more.
|
|
|
|
PA-B-101 Broom Frame for Pro Groomer PR72 or All Star AS72 Groomer. 6 ft. long. This is the metal welded frame only. Does not include aluminum channels or brushes.
|
|
|
|
 AL-G-033 Brass Flange Bearings (for shaft mounts on HD Model 600 Elec Cylinder Tube).
One side bearing is shorter than the other. The short bearing installs on the shaft mount that has the grease fitting.
|
|
|
|
AL-G-509 Manual Override Wrench. Bent, black steel with 3/8" socket at end.
Used to manually operate Model 600 Actuator / Cylinder.
|
|
|
|
AL-H-035 Hex Bit.
This hex bit has a square 3/8" socket fitting at one end with a 5/16 hex bit at other end.
When the hex end is put in a cordless drill the 3/8" square socket end can then be used to operate the Model 600 Actuator / Cylinder.
|
|
|
|
 PA-T-101 Hitch Adjustable For PR72 and AS72 machines.
|
|
|
|
 PA-G-101 Hitch Pin with Chain and Safety Pin
For all machines.
|
|
|
|
ALDM-1000 Drag Mat Brackets. Set of 2. If you need only one then specify when you order. With Gravity Lock installed.
Includes hardware. For PR72, WB90, HY72, and AS72 Groomers.
|
|
|
|
AS-S-001 Grading Bar LevelFlo1
6 ft. long. 11 holes. Used for AS72 All Star Groomer, PR72 High Speed Grading Bar, and for
MG Series machines - WB90, HY72, DR72, and BG72 Grading Bars.
|
|
|
|

PA-A-101 Manual Lift Arm. Complete Assembly including Lift Arm, Locking Pin, Spring, and Cotter Pins.
For Manual Lift System on Pro Groomer PR72 and All Star Groomer AS72 machines.
|
|
|
|
 PA-A-001 Manual Lift Arm only. No Locking Pin.
Does not include locking pin, spring, washers, or cotter pins. Manual Lift on Pro Groomer PR72 and All Star Groomer AS72. Complete Lift Arm Assembly see PA-A-101
|
|
|
|
PA-A-004 Locking Pin for Manual Lift Systems. For Manual Lift System on Pro Groomer PR72 and
All Star Groomer AS72 machines. Includes Spring, Washers or Cotter Pins. Attaches to PA-A-001 Lift Arm.
|
|
|
|
AL-G-022 Turnbuckle. PR72 and AS72 Manual Lift System.
5/8" Clevis Ends. 6" Takeup. Galvanized finish.
|
|
|
|
PRCH-5825 Chisel Scarifier complete pkg. for PR72 Pro Groomer.
Includes heavy duty 3/8" think steel frame, all 36 abrasion resistant steel teeth, and hardware. Attaches behind leveler to pulverize hard infields. See PR72 web page or catalog for more details.
|
|
|
|
 PR-L-101 66" wide Leveler Implement replacement for PR72 Pro Groomer LevelFlo2
This is a replacement for the completely welded implement called the "leveler". We suggest you also inspect all hardware used to attach this implement to your machine and determine if any hardware also needs replaced.
|
|
|
|
PR-L-102 84" wide Leveler Implement replacement for PR90 Pro Groomer LevelFlo2 This is a replacement for the completely welded implement called the "leveler".
We suggest you also inspect all hardware used to attach this implement to your machine and determine if any hardware also needs replaced.
|
|
|
|
AL-G-007 Spring Tines. For Pro Groomer Quick Attach Models. 11 or 12 needed for a full set.
Full un-cut style Tines.
|
|
|
|
 PRST-6800 Spring Tine Scarifier. Complete assembly.
Complete package. For who did not order this optional attachment when they ordered their original machine and
now want to add it. Includes frame, brackets, pipes and all tines. See PR72 web page or catalog for more details.
|
|
|
|
 AL-G-508 Spring Tines for PR Tongue Towed or AS72 Spring Tine Scarifiers. These are "cut style".
22 total needed for a complete set.
|
|
|
|
 AL-G-507 Clevis PR72 Leveler Adjustment. Connects to threaded shaft of Height Adjustment Screw Lift. Two of these exist on a Pro Groomer.
|
|
|
|
 AL-G-505 Screw Lift. PR Pro Groomer Tongue Towed models.
PR Leveler Adjustment. Connects to brackets at top and to clevis at bottom.
|
|
|
|

PRRB-1925 Rock Basket for PR Pro Groomer models.
|
|
|
|
 PR-T-101 Quadrant Assembly. For PR72 Pro Groomer Tongue Towed Manual Lift System
Fits hole configuration of the PR72 frame only. Bolts to top of frame.
|
|
|
|
AS-S-001 Grading Bar replacement (bar only) for PR High Speed Grading Bar. 6 ft. long. 11 holes.
|
|
|
|
 AS-T-101 Quadrant Assembly. For AS72 All Star Groomer Manual Lift System
Fits hole configuration of the AS72 frame only. Bolts to top of frame.
|
|
|
|
AS-S-001 Grading Bar replacement (bar only) for AS72 LevelFlo1 Grading - Leveling Bar 11 holes. 6 ft. long
|
|
|
|
 AL-G-007 Spring Tines. Qty. of 22 needed for a full set.
MG Series Machines use "full un-cut" Tines. (WB, BG, GT, DR, HY, BR) Also used for Pro Groomer Quick Attach models. 11 or 12 needed for set.
|
|
|
|
MG-R-002 Rubber Mat Rubber Mat replacement only. Does not include frame.
|
|
|
|
MG-F-102 Center Axle Union - ST Systems. MG Series Machines.
WB, BG, GT, DR, HY, and BR machines. This is for the "standard duty ST" style system. Also see HD Style. This brackets uses a 1/4" Clevis Pin to attach to the clevis end of the "ST" Standard Duty Model 225 Elec Cylinder. If your machine uses 1/2" clevis pin to attach the axle union to the cylinder then it's an "HD" system in which case you need MG-F-109.
|
|
|
|
MG-F-109 Center Axle Union - HD Systems. MG Series Machines.
WB, BG, GT, DR, HY, and BR machines. This is for the "heavy duty HD" style system. Also see ST Style. This brackets uses a 1/2" Clevis Pin to attach to the clevis end of the "HD" Heavy Duty Model 600 Elec Cylinder. If your machine uses 1/4" clevis pin to attach the axle union to the cylinder then it's an "ST" system in which case you need MG-F-102.
|
|
|
|
MG-T-103,Tine Adjustment Bar (10 Hole) For MG Series machines (WB, BG, GT, DR, HY, BR) qty. of two are used for Spring Tine Adjustment front of frame.
For PR and AS machines qty. of one is used at front of frame for Spring Tine Adjustment.
|
|
|
|
MG-T-107 Tine Adjustment Bar (6 Hole) For MG Series machines (WB, BG, GT, DR, HY, BR) two are used for Rear Wheel Tine Adjustment on each side of rear.
For PR and AS machines qty. of one is used at front of frame for Spring Tine Adjustment.
|
|
|
|
MG-F-103 Left Axle MG Series Machines (WB, BG, GT, DR, HY, BR) Stand behind machine and look forward
to determine which axle you need (left or right).
|
|
|
|
MG-F-104 Right Axle MG Series Machines (WB, BG, GT, DR, HY, BR) Stand behind machine and look forward
to determine which axle you need (left or right).
|
|
|
|
AS-S-001 Grading Bar replacement (bar only) for AS72 LevelFlo1 Grading - Leveling Bar 11 holes. 6 ft. long
|
|
|
|
Drag Mats
|
|
|
|
AL-G-501 Drag Mat 72" wide x 36" Deep. Complete with 1" x 1" Square Steel Tube mounted to front edge to fit inside
Drag Mat Brackets. For use on all machines. Please confirm the width of your drag mat before ordering.
|
|
|
|
AL-G-026 Drag Mat 72" wide x 36" Deep NO 1" x 1" Square Steel Tube. Drag Mat Only.
|
|
|
|
AL-G-502 Drag Mat 78" wide x 36" Deep. Complete with 1" x 1" Square Steel Tube mounted to front edge to fit inside
Drag Mat Brackets. For use on all machines. Please confirm the width of your drag mat before ordering.
|
|
|
|
AL-G-025 Drag Mat 78" wide x 36" Deep NO 1" x 1" Square Steel Tube. Drag Mat Only.
|
|
|
|
AL-G-503 Drag Mat 84" wide x 36" Deep. Complete with 1" x 1" Square Steel Tube mounted to front edge to fit inside
Drag Mat Brackets. For use on all machines. Please confirm the width of your drag mat before ordering.
|
|
|
|
AL-G-027 Drag Mat 84" wide x 36" Deep NO 1" x 1" Square Steel Tube. Drag Mat Only.
|
|
|
|
AS-S-001 Grading Bar replacement (bar only) for all MG Series machines.
Includes WB, AS72 LevelFlo1 Grading - Leveling Bar 11 holes. 6 ft. long
|
|
|
|
Electrical Parts
|
|
|
|
AL-E-097, Wireless Receiver. Introduced 1-1-19 for all new "WR" or "PW" systems. Pairs to Transmitter AL-E-098. Also pairs to older
versions of Transmitters. 7 wire. 433 mhz. Identify by sticker on top of receiver. Or identify by it's 3-way Triangular Sealed Connector
used for Sticker on back side of Transmitter references part number. It's also helpful to provide your machine Serial Number.
|
|
|
|
AL-E-098, Wireless Transmitter. Black with white buttons. Introduced 1-1-19 for all new "WR" or "PW" systems. Pairs to Receiver AL-E-097. See the sticker on the top of your current Receiver for part number
reference. It also helps if you provide your machine Serial Number for reference.
|
|
|
|
AL-E-579, Auxiliary Override Toggle Switch and 10 ft. Cord package. Use with AL-E-097 Receiver. Introduced 1-1-19 for "WR" or "PW" systems.
Attaches to the 3-wire Triangular connector on wireless receiver to be used in emergencies to control model AL-E-502 electric cylinder. Includes toggle switch and 10 ft. 3-wire cord with sealed connectors at each end.
|
|
|
|
AL-E-099, Auxiliary Toggle Switch only. Use with 10 ft. cord AL-E-580 and with Receiver AL-E-097. Introduced 1-1-19 for "WR" or "PW" systems.
Attaches to the 3-wire Triangular connector on wireless receiver to be used in emergencies to control model AL-E-502 electric cylinder. Includes toggle switch only with triangular 3-wire sealed connector.
|
|
|
|
AL-E-580, Auxiliary 10 ft. extension cord only. Use with toggle switch AL-E-099 and with Receiver AL-E-097. Introduced 1-1-19 for "WR" or "PW" systems.3-wire. Attaches to the 3-wire Triangular connector on wireless receiver and toggle switch to
be used in emergencies to control model AL-E-502 electric cylinder. Includes 10 ft. cord only with sealed connectors at each end.
|
|
|
|
AL-E-006, Transmitter 433T-2. Discontinued. Replacement part number starting 1-1-20 is AL-E-098. New part will pair with your version
2013 receiver. Identify your old transmitter by it's sticker on the back. Sticker identity shows 433T-2. Black transmitter with blue buttons.
Originally paired with Receiver AL-E-507 (433T-2). Used 2032 Coin shaped replacement battery found at many stores. It also helps if you provide your machine Serial Number for reference.
|
|
|
|
AL-E-507, Wireless Receiver 433R-6. Discontinued. Replacement part number starting 1-1-20 is AL-E-097. New part will pair with your
old version 2013 transmitter. Identify your old receiver by it's sticker on top. Sticker shows 433R-6. It also helps if you provide your machine
Serial Number for reference. This receiver also identified by it's 2-wire medium size flat connector attached to the orange-yellow wires and it has an external black wire antenna.
|
|
|
|
AL-E-581, Auxiliary Override Toggle Switch & 10 ft. Cord package. Introduced 1-1-19 for older style 2013 series "WR" systems. Use with old style 2013 system AL-E-507 Receiver. Toggle attaches to the 2-wire Triangular connector on wireless
receiver (orange-green wires) to be used in emergencies to control model AL-E-502 electric cylinder. Includes toggle switch and 10 ft. 4-wire cord.
|
|
|
|
AL-E-100, Auxiliary Toggle Switch only. Introduced 1-1-19 for older style 2013 series "WR" systems. Use with 10 ft. cord AL-E-582 and with old style version 2013 Receiver AL-E-507. The toggle switch has a large flat 2-wire female connector
that attaches to 10 ft. cord AL-E-582. This toggle used to control model AL-E-502 electric cylinder in emergencies.
|
|
|
|
AL-E-582, Auxiliary 10 ft. extension cord only. Introduced 1-1-19 for older style 2013 series "WR" systems. Use with toggle switch
AL-E-100 and with old style version 2013 Receiver AL-E-507. The cord is 4-wire. At one end it has two 3/8" ring terminals on red and black
wires (attach to 12 volt battery) and a 2-wire medium flat connector (green-white wires) that attaches to the medium 2-wire connector from
orange-green wires of receiver. The other end has a large 2-wire flat male connector that attaches to toggle switch AL-E-100.
|
|
|
|
AL-E-008, Wireless Transmitter 915T-2 (Blue Buttons) Discontinued.
Used to pair with 915R-6 (AL-E-509) receiver. We no longer have 915 mhz transmitters or receivers. If you need replacement we will help you convert your wireless system to our newest version. Call for details.
Sticker on back side of Transmitter references part number. It also helps if you provide your machine Serial Number for reference.
|
|
|
|
AL-E-509 Wireless Receiver 915R-6 with Connectors. Discontinued.
Used to pair with 915T-2 (AL-E-008) transmitter.We no longer have 915 mhz transmitters or receivers. If you need replacement we will help you convert your wireless system to our newest version. Call for details.
Sticker on top of receiver references part number. It also helps if you provide your machine Serial Number for reference.
|
|
|
|
AL-E-007, Wireless Transmitter 433T-2 (Orange Buttons). Discontinued. Used to pair with 433R-4 (AL-E-508) receiver. We no longer have these
433R-6 transmitters. If you need replacement we will help you convert your wireless system to our newest version. Call for details.
Sticker on back side of Transmitter references part number. It also helps if you provide your machine Serial Number for reference.
|
|
|
|
AL-E-508 Wireless Receiver 433R-4 with Connectors. Discontinued. Used to pair with 433R-4 (AL-E-007) transmitter. We no longer have
4-wire 433 mhz receivers. If you need replacement we will help you convert your wireless system to our newest version. Call for details.
Sticker on top of receiver references part number. It also helps if you provide your machine Serial Number for reference.
|
|
|
|
 AL-E-516 Power / Ground Harness HDWR, 12 ga., 3/8" Ring Terminals 3/8" Ring Terminals connect to 12V full size battery. Receptacle connects to Wireless Receiver.
|
|
|
|
AL-E-517, Extender Harness, 9 inch long, HDWR Wireless Systems, 12-14 Sealed Male Plug and Receptacle
Male Plug connects to Wireless Receiver. Female Receptacle connects to HD 600 Cylinder Plug.
|
|
|
|
AL-E-518, Extender Harness, 12 inch long, MG Series HDWR, 12-14 Sealed Male Plug and Receptacle
Male Plug connects to Wireless Receiver. Female Receptacle connects to HD 600 Cylinder Plug.
|
|
|
|
AL-E-505, Battery Charger, G1100 1.1 amp Trickle Charger with 1/4" Ring Terminal Connectors.
For "ST" systems. Wiring manual with your original machine includes specs on all wiring system parts.
|
|
|
|
AL-E-506 Battery Charger, G1100 1.1 amp Trickle Charger with 3/8" Ring Terminal Connectors.
For "HD" systems. Wiring manual with your original machine includes specs on all wiring system parts.
|
|
|
|
 AL-E-543, Battery Charger, Schumacher Brand 1.5 amp Charger with 3/8" Ring Terminal Connectors. For "HD" systems.
We have discontinued using this charger. It is still available on the market. Check locally or contact us for specifics.
|
|
|
|
AL-E-503, Battery Monitor. With 1/4" Ring Terminals. Connects to small group U-1 half size sealed deep cycle 12 volt batteries.
Be sure to check the size and shape of the connectors at end of wires to confirm you are ordering the correct monitor. 12 volt use only. Wiring manual with your original machine includes specs on all wiring system parts.
|
|
|
|
AL-E-504 Battery Monitor. With 3/8" Ring Terminals. Connects to large group 24 deep cycle 12 volt batteries.
Be sure to check the size and shape of the connectors at end of wires to confirm you are ordering the correct monitor. 12 volt use only. Wiring manual with your original machine includes specs on all wiring system parts.
|
|
|
|
AL-E-097 PW2019 Wireless Receiver, 7 Wire, 433 mhz,
(Pair AL-E-098)
|
|
|
|
AL-E-098 PW2019 Wireless Transmitter, Black, White Buttons
(Pair E-097)
|
|
|
AL-E-579 PW2019 Auxiliary Override Switch Pkg. (3 Wire) for Receiver E-097
|
|
|
AL-E-099 PW2019 Auxiliary Switch Only
(3 Wire) for Receiver E097
|
|
|
AL-E-580 PW2019 Auxiliary Extension Wire Only
(3 Wire) for Receiver E-097
|
|
|
AL-E-584 PW2019 70" Groomer Tongue Wire, With Split Loom
|
|
|
AL-E-583 PW2019 10 Ft. Power & Ground Harness (12 ga) and 10 ft. Split Loom
|
|
|
AL-E-517 PW2019 Extender Harness HD, 9", 12-14 Sealed Plug & Receptacle
|
|
|
AL-E-101 SB2019 "SB" SwitchBox Control Only, 4 Wire
|
|
|
AL-E-575 SB2019 "SB" Fused Power/Ground Harness, Alligator Clips
|
|
|
AL-E-576 SB2019 "SB" Groomer Tongue Wire, 70" (SB & PW)
|
|
|
AL-E-577 SB2019 "SB" 5 Ft. Extension Wire, 14 ga.
|
|
|
AL-E-578 SB2019 "SB" 12 Ft. Extension Wire, 14 ga.
|
|
|
AL-E-533, Complete 8 ft. Fused SwitchBox Control, with all wires attached. Complete.
Includes fused power (with fuse) control wire, alligator clips to attach to battery, 16" stub wire to connect an extension wire, and a complete
plastic switch box. This replaces the entire fused switch box control. Does not include extension wires (10 ft. or 18 ft. extensions). Wiring manual with your original machine includes specs on all wiring system parts.
|
|
|
|
 AL-E-537 "SB" 18 Ft. Extension Wire, Sealed Connectors Both Ends.
|
|
|
|
AL-E-538 "SB" 10 Ft. Extension Wire, Sealed Connectors Both Ends.
|
|
|
|
 AL-E-551 Lid Only for "SB" SwitchBox.
Box cover has rectangular hole for Rocker Switch.
|
|
|
|
AL-E-534, replacement SwitchBox for "SB" Systems.
Includes black plastic Box. All holes cut / drilled. Lid and Screws. 4 Push On blade style crimp wire connectors. 2 Rubber Grommets (seals). This is a replacement Switch Box only. Does not
include Rocker Switch or Wires. To replace the box the old crimped connectors (inside box) are cut off, wires inserted through rubber grommets into new box, then new connectors crimped onto wires to complete the repair.
|
|
|
|
AL-E-535 Stub Wire for "SB" SwitchBox. Bare wire ends insert into SwitchBox for connection to Rocker Switch with flat push-on spade style crimp connectors. 2 Connectors included. Female Receptacle end used to connect
SB Extension Wires.
|
|
|
|
AL-E-536 8 ft. "SB" Fused Power Wire Only. Bare wire ends insert into SwitchBox for connection to Rocker Switch with flat
push-on spade style crimp connectors. Opposite end of this 8 ft. long service wire has 2 Alligator Clips for connection to 12V
battery (red positive and black negative). Positive wire is fused. Includes 30 amp slow burn fuse and 4 flat push-on spade style crimp connectors.
|
|
|
|
 AL-E-011 Rocker Switch for "SB" and "HW" Electric Lift Systems
Wiring manual with your original machine includes specs on all wiring system parts.
|
|
|
|
AL-E-512 "HW" 70" long Groomer Tongue Wire (12 ga.) Red and Black Wires. One end has Sealed Female Connector (Connects to Cylinder Motor Plug)
and other end has HD 12V Connector (connects to Tow Machine Wire). Includes Dust Cover.
|
|
|
|
AL-E-513 "HW" 16 ft. long Tow Machine to Switch Control Wire (12 ga.) Red and Black Wires.
One end has bare wires (to crimp flat push-on spade style crimp connectors for Rocker Switch). Opposite end has HD 12V Connector that attaches to Groomer Tongue Wire. Includes 2 Crimp on connectors and Dust Cover.
|
|
|
|
AL-E-514 "HW" 8 ft. long Fused Power Wire (12 ga.) Tow Machine Battery to Switch. One end has bare wires (to crimp flat push-on spade style crimp connectors for Rocker Switch). Opposite end has 3/8" Ring Terminals on red and black wires. Red wire is fused. 30 amp fuse included.Includes 2 Crimp on connectors
|
|
|
|
 AL-E-011 Rocker Switch for "HW" and "SB" Electric Lift Systems
Wiring manual with your original machine includes specs on all wiring system parts.
|
|
|
|
 AL-E-014 "HW" Rubber Dust Cover. Slips over end of HD 12V Connector to keep connector clean from debris.
|
|
|
|
 AL-E-069 "CR" 10 ft. long Corded Remote Control. Corded remote only. This does not include the wiring harness.
Wiring manual with your original machine includes specs on all wiring system parts.
|
|
|
|
AL-E-544 "CR" 10 ft. Corded Remote and Wiring Harness with Plug and Connectors.
The Harness bolts to the front of plastic group 24 battery case of "CR" electric lift systems. 10 ft. Corded Remote plugs into the Harness. Requires wire connections inside battery case to complete the repair.
|
|
|
|
 AL-E-068, Contactor (for 12 volt corded remote control systems).
Wiring manual with your original machine includes specs on all wiring system parts.
|
|
|
|
AL-E-547 "CR" Fused Power Wire for Corded Remote Elec. Lift Systems (+) Positive Only.
1/4" Ring Terminal connects to Contactor. 3/8" Ring Terminal connects to Positive terminal of Battery. Includes 30 amp slow burn fuse in sealed fuse holder.
|
|
|
|
AL-E-545 "CR" Conversion Harness. Model 600 Cylinder to Contactor. Converts older style electric
cylinder wires with 1/4" Ring Terminals for connection to the Contactor inside battery case. Our new electric cylinders have a sealed 12-14 Male Plug. This conversion harness converts the new style male plug from
electric cylinder to 1/4" Ring Terminals for connection to Contactor.
|
|
|
|
 AL-E-502 Electric Cylinder, HD Model 600 with 12-14 Sealed Male Plug Connector
For "HD" heavy duty electric lift systems.
|
|
|
|
AL-E-530 Motor Only, Model 600 Electric Cylinder with 12-14 Sealed Male Plug Connector For "HD" heavy duty electric lift systems.
|
|
|
|
AL-E-542 Electric Cylinder, HD Model 600 with 1/4" Ring Terminal Connectors.
When you contact us about this part consider a possible upgrade to our new style connectors which will include a
cylinder conversion harness to convert your system to our newest design. For "HD" heavy duty electric lift systems.
|
|
|
|
AL-E-531, Motor Only, Model 600 Electric Cylinder with 1/4" Ring Terminal Connectors.
When you contact us about this part consider a possible upgrade to our new style connectors which will include a
cylinder conversion harness to convert your system to our newest design. For "HD" heavy duty electric lift systems.
|
|